Acard PCI-to-IDE ATA-133 Manuale Utente Scaricare il pdf (Pagina 13)

Page 13

14. Answer N to decline Offline Copy.

15. Answer Y to enable Auto-rebuild.

16. When asked Are You Sure?, Press Y to accept.

17. Press ESC to exit the RAID BIOS and reboot the computer.

RAID 0+1 (Mirror+Striping)

This RAID array to be used on New/Blank hard drives only, striping

destroys existing data on the hard drive. RAID 0+1 requires four hard

drives.

For Manual Setup

1. As the BIOS boots press F3 when prompted to enter the RAID

BIOS.

2. At the next screen press F2 to from a RAID set.

3. Press F3 to create RAID 0+1.

4. Choose the chunk size by pressing the appropriate number key(64

is recommended).

5. Enter the first Source drive, then enter the second source drive.

Note: To optimize performance, configure both source drives to be

from different channels and configure both destination drives to be

from different channels.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 21 22

Nessun commento

Acard PCI-to-IDE ATA-133 Manuale Utente Pagina 13