Acard PCI-to-IDE ATA-133 Manuale Utente Scaricare il pdf (Pagina 5)

Page 5

Device Connection

The UltraATA 133 PCI RAID Card is a dual channel Ultra ATA/133

controller that support up to for IDE hard disk drives. To achieve

maximum performance and compatibility we suggest using identical

hard drives in building your RAID sets.

In any given RAID set, it’s best to install the hard drives on separate

channels, either Master to Master or Slave to Slave. For example, if

you are setting up a RAID set with two hard drives, install the first

drive on IDE1 as Master and the second on IDE2 as Master. Use the

same concept for multiple hard drives.

1. Turn Off the power to your computer and any other connected

peripheral devices.

2. Unplug the power cord from the back of the computer.

3. Remove your computer’s cover.

4. Remove the slot bracket from an available PCI slot.

5. To install the card, carefully align the card’s bus connector with

the selected PCI slot on the motherboard. Push the board down

firmly, but gently, until it is well seated.

6. Replace the slot bracket’s holding screw to secure the card.

1 2 3 4 5 6 7 8 9 10 ... 21 22

Nessun commento

Acard PCI-to-IDE ATA-133 Manuale Utente Pagina 5