Acard PCI-to-IDE ATA-133 Manuale Utente Scaricare il pdf (Pagina 7)

Page 7

drive, connect it to the end connector of cable. If you have a second

hard disk drive, connect it to the middle connector of cable.

4. Reconnect the system power and other peripherals to your

computer.

RAID Arrays

RAID Arrays are setup in the UltraATA 1333 RAID PCI Card’s BIOS.

Find your RAID set and follow the steps in the order in which they

appear.

RAID 0 (Striping)

This RAID array to be used on New/Blank hard drives. Striping will

destroy existing data on the hard drive.

For Manual Setup

1. As the BIOS boots press F3 when prompted to enter the RAID

BIOS.

2. At the next screen press F2 to form a RAID set.

3. Press F1 to create RAID 0.

4. Choose the chunk size to be used in the RAID set(64 is

1 2 3 4 5 6 7 8 9 10 11 12 ... 21 22

Nessun commento

Acard PCI-to-IDE ATA-133 Manuale Utente Pagina 7